How To Reset Your Home Security System In Hammond
An important advantage of having your security system hooked up by professionals is that you rarely need to worry about it. With that being said, there could be a couple situations when you have to reset your alarms in Hammond. When using the ADT Command hub, your system reset usually needs only a few minor button tap when you’ve experienced common events like false alarms and battery changes.
Read The Manual Before Attempting An Alarm Reset
A word to the wise before you begin to reset your Hammond home security system, check your owner’s manual first. You don't want to compromise your property’s defense as a result of touching a button in error. Also, the process might be different if you upgraded from a numerical keypad to a fully digital system. If there’s ever a time when you’re unable to figure out how to reset your system, don't worry as you can always reach out to your trusted security specialists.
Resetting Your Hammond Security System Due To A False Alarm
Generally, a false alarm takes place because of the accidental tripping of a sensor. You can engage the control panel or open your ADT security app and hit the shield icon and submit your security code to deactivate the alarms for these instances. You might be contacted by your security monitoring team, but just tell them you had a false alarm.
Tips To Reset Your Alarm When Experiencing A Power Outage In Hammond
If the power goes out because of a storm or other event, you may begin hearing a beeping sound from your alarm’s central interface. That indicates that your security is using the secondary power source. To reset the alarm and halt the constant chirping, you need to disarm/rearm the system.
Keep in mind, if your power outage lasts for an extended time, you may need a full reset of your home’s security. Heed the directives in the manual -- normally by putting in your unique passcode and tapping the designated button two times -- and you should be back in business. You could still hear chirps from the backup power, as it might not cease until your battery is fully charged. Contact your home security specialists if you keep having difficulties with your ADT equipment at least 20 hours after your power is back on.
When You Need To Reset Your Home Security System After Replacing A Battery
There will be infrequent times when you will have to change a battery within one of the devices in your security installation. To do this, you will set your alarm system to Test Mode so you prevent setting off an accidental alarm. Once the you replace the old battery, remove the alarm from "Test Mode" and restore your usual settings. If the control panel is unable to register the device or the battery icon stays on, you could require a total reset of the system.
Resetting Your Hammond Security System After Adding Or Deleting A Code
Removing or adding personal codes can be done on your ADT Command hub and your ADT smartphone app. You should never have to perform a resetting of your system when deleting or adding users. With that being said, if you relocate to a new house that already has an ADT alarm system, you'll want to reach out to your residential security experts at (219) 207-5149 to establish a new contract. The installation tech will go on site to replace outdated parts, install additional components (if necessary), and perform a full reset.
A Well-Designed Security System Is Only A Call Away
Figuring out how to reset a home security system in Hammond is difficult if it isn’t equipped with understandable equipment and instructions. If you would like to get your intuitive home security system, contact (219) 207-5149 or submit the form below. We’ll be ready to customize the perfect security system for your needs.